Even the most impressive tile-cleaning routine in the shower can leave grout begging for extra attention to detail. Mould and mildew are common place between shower tiles as both breed quickly in the constantly wet and humid atmosphere created in a shower. If your shower grout is light than you’ll see it as spots first and then bigger areas. If you are quick and diligent, you can clean it before it gets out of control.
If the grout in your shower is dark, you may have a bigger problem on your hands than you realize as mould and mildew can be much more easily disguised, becoming a bigger health concern. Always make a point to include grout cleaning as part of your ordinary weekly shower routine to help abate mould and mildew buildup on the grout before it becomes a health concern and a big chore. Are you wondering how to clean grout in your shower? Read on to learn both natural methods and which chemicals are best to clean grout in the shower so you can keep your grout clean and looking new.
Here Are How to Clean Grout in Shower
One of the best ways to clean shower grout doesn’t involve the use of harsh cleansers or chlorine bleach-based products. It is challenging to use harsh chemicals in an enclosed bathroom space, where ventilation and air circulation are compromised. A powerful indoor cleaning solution can be made with oxygen-based bleach (hydrogen peroxide, sodium percarbonate or sodium perborate) and washing soda. Both are notably more eco-friendly and are known to help treat and prevent the growth of mould and mildew in a highly effective manner
The next time you find yourself deep cleaning the bathroom tiles, pull this recipe from your memory bank:
Start by creating a paste-like mixture using one part hydrogen peroxide and two parts of an oxygenated powder product, such as OxiClean or generic washing soda. A thick combination of these two powerful ingredients will adhere well to grout lines in any shower and won’t dripping away or run. They also great for spot-treating areas affected by mould and mildew. As it’s not too hard, it is a great defense against mould spores. Even if your grout looks clean, consider applying this solution as an effective cleanser that will aid in preventing mould and mildew from blossoming in your shower. A cursory glance at the ingredients list will show that hydrogen peroxide is a common ingredient in most mould and mildew abatement products so it’s no surprise that this easy to make and safe at-home solution works extremely well.
Mix the paste in a bowl and use an old toothbrush to apply it to the grout lines between the tiles in your shower. Remember to pay attention to the areas where you can visibly see mould and mildew but also ensure you coat areas of the shower that may be more mould-prone and mould-affected than other areas. This can include any grout along corners and floor tiles, shelves, and the grout and tile that surrounds the shower drain. These are areas where water can collect and sit, causing a bigger build up of mould and mildew. Allow the paste to set for about ten minutes, letting it work its magic and then give the grout lines one more good scrub with an electric spin scrubber. Don’t be afraid to use some elbow grease. When you are done, rinse the area thoroughly and use a clean rag and clean water to wipe the surfaces clean.
How to Clean Shower Tiles
It helps to consider ways to clean build-up from shower surfaces while you are focused on cleaning the grout in your shower. A simple white vinegar wash is a good solution for non-porous tile surfaces. You need to be more careful with marble and other porous stone surfaces. These are more safely cleaned using plain water or cleaning products specifically formulated for stone as you want to avoid damaging the colour or finish.
How to Get Grout White Again Naturally with Lemon Juice or White Vinegar
Begin by saturating the grout in your shower with lemon juice which is a mild disinfectant that has been shown to get rid of grout stains naturally. You can also use white vinegar to clean mould in shower grout naturally and chemical-free. All you have to do is pour vinegar from the bottle into the cap and pour it over the dirty grout lines. You will need to allow the lemon juice or vinegar to sit for 10 to 15 minutes before you scrub the area with a small brush or old toothbrush. Rinse the treated area and wipe dry with a clean towel or rag and clean water. This is a great way to clean epoxy grout in the shower in a safe manner as harsh chemicals can damage the epoxy. It is also a great way to clean porcelain tile and grout in the shower without causing damage.
In the end, there are many ways to clean your shower grout, either naturally; with baking soda, vinegar, washing soda or lemon juice or with chemicals for tougher jobs. A good weekly cleaning routine will go a long way to ensuring mould and mildew don’t overtake your shower grout and tiles and save you a lot of elbow grease down the road. So, now you know how to clean grout in shower, right? Let’s keep clean your home every day. Happy Cleaning!