It is very important to keep your bathroom and kitchen clean. With a clean bathroom and kitchen, you’ll feel confident and happy. To keep your bathroom and kitchen clean, you might be cleaning every day. But still, your tiles look dirty. Right?
Yes. There are lots of dirt between your tiles. This dirt that attached to the grout is very hard to clean. So, today we will talk about how to clean this grout without any problem. There are two methods that you can clean the tile grout.
Method 01 – Using baking soda and vinegar for the cleaning process
Method 02 – Using baking soda and hydrogen peroxide for the cleaning process
But, today we are going to talk about How to use hydrogen peroxide to clean tile grout.
Table of Contents
What is Hydrogen Peroxide?
This colorless liquid chemical is used in personal care products and cleaning. If we talk about the practical uses of this chemical, here are some examples for you.
- For hair dyes
- For mouthwashes and toothpaste
- For bathroom cleaners
- For removing laundry stains
- Use as an antiseptic during first aid
- For the water treatment process
Is there a danger involved in using hydrogen peroxide for cleaning tile grout?
To tell you the truth, there are some risks involved in using this chemical for cleaning grout. But, these dangers can be avoided easily, if you follow safety protocol.
- If this chemical gets inside of your body or wounds, it can cause a serious issue.
- Some people may have an allergic reaction to hydrogen peroxide.
- If your skin is exposed to a higher volume of hydrogen peroxide, it can cause serious skin blisters and burns.
Although there are risks involved with using this chemical, you don’t have to worry about that if you are wearing protective gear. Something like rubber gloves.
Cleaning your tile grout with baking soda and hydrogen peroxide
First, here are all the materials and tools you need for Cleaning your tile grout.
- Baking Soda
- Hydrogen Peroxide
- Rubber gloves
- A grout brush or scrub brush
- Paper towels
Step 01: Wear appropriate protective gear.
First, you must take care of your safety. With the earlier topic, you now have a better understanding of the risks of using hydrogen peroxide for this cleaning process. So, always remember to wear some rubber gloves. This will protect your hands nicely. Also, don’t let any of these chemicals get in your eyes. If it does happen, make sure to wash your eyes soon as possible. Now you are ready to start this cleaning process.
Step 02: Mix the hydrogen peroxide and baking soda.
Then add one part of hydrogen peroxide to two parts of soda, and mix these ingredients well until you get the form of a paste. Keep in mind, the ratio of hydrogen peroxide, baking soda must be 1:2. Otherwise, you won’t get the chemical reaction that you need for this cleaning process.
Step 03: Applying the paste to the tile grout.
Now apply the paste to the tile grout using a grout brush or scrub brush. If you are unable to find a grout brush or scrub brush; you can always use an old toothbrush for this process. It doesn’t matter what you are using, you need to apply the paste properly to the tile grout.
Step 04: Let the magic works.
After applying the paste, you should let the paste interact with the grime. At least give five minutes. In those five minutes, you can see the chemical reaction between the paste and the grime. Also, don’t leave the paste for more than five minutes. Sometimes the grime will settle back with the grout if you leave the paste to sit on the grout for too long.
Step 05: Scrub the tile grout.
After five minutes, take your grout brush and scrub the tile grout. If you follow the instruction correctly, you can see the stain and dirt begin to break down while you are scrubbing the grout. Also, you might have to scrub two or three times to separate all grime from the grout.
Step 06: Clean all the separated grime.
After you have separated all the dirt and stain from the grout, use a paper towel to collect all that separated grime. If you don’t have any paper towels, you can always use old rags for this procedure.
Step 07: Mop up your tiled floor.
Finally, after good cleanup, you can mop the tiled floor. This will remove any paste and dirt that you missed in the earlier step. If you want to clean the grout, you may need a rag. Anyway makes sure you clean your floor properly.
Benefits of using hydrogen peroxide for the cleaning process
Highly effective against bacteria and fungus
Hydrogen peroxide can clean and disinfect any type of bacteria, fungus, molds, or mildew. That is why the healthcare industry uses this chemical for infections and other threads. So, not only hydrogen peroxide can clean your floor, but it will also give you protection against any type of bacteria or fungus.
Hydrogen peroxide won’t damage your equipment or tools. So, you can use it without any worry. It won’t damage your kitchen equipment or bathroom items.
Most of the chemical products can damage the environment. Sometimes it can release some damaging gas or liquid to the surroundings. But, Hydrogen peroxide is an eco-friendly chemical. It is made from oxygen and water. So, it will not affect the environment negatively.
Final Thoughts on using hydrogen peroxide to clean tile grout
To sum up, hydrogen peroxide is the best way to clean your tile grout at your home. It will give you a brand new tiled floor. Also, it can disinfect any bacteria or fungus. That will give you the extra protection that you always needed. The only thing you need to worry about is your safety. Whenever you work with such a chemical, always remember to wear protective gear. So, don’t waste any time. Start the cleaning process today.