A Spruced Home

a spruced home, pick up, clean up

Steam cleaning: Three steps to a Fresher Home!

Chemicals have been known to have a lot of side effects on us though they are always considered to be effective in all their uses. When it comes to cleaning, whether its clothes or carpets, we normally use detergents, this is made of chemicals that might cause bleaching effects on our clothes and carpets. It’s for this reason that we long for a cleaner that is more effective but lacks chemicals. Luckily there is a steam cleaner that fits correctly to the analogy of the cleaner we really want. It works by the principle of using steam. It’s no coincidence that it is named a steam cleaner. To produce steam, you need water then heat it to high temperatures until steam is formed. The high temperatures from the steam are used to remove the stains that can be found on the hard surfaces. You can use a steam cleaner to clean your home and get a fresher home if you follow the following three steps that we have outlined below.

Read Now : Best Handheld Steam Cleaner For Grout

What places in your home can you clean with a steam cleaner?

Places to clean with steam cleaner
Before going into the steps of using a steam cleaner, it’s good to know where you can use the steam cleaner. There are a lot of places that you can use it that you even didn’t think of. Most people associate it with cleaning floors and carpets. These are just a few places you can use to clean using a steam cleaner. Here are other places in your home that a steam cleaner can be used.

  1. The windows and window frames.
  2. Doors, and door frames.
  3. Use it to clean ceiling fans.
  4. Clean your furniture, coaches, mattresses, and upholstery.
  5. Clean all tiled floors as long as they are sealed very well.


Some of the places to avoid when using a steam cleaner.

There is someplace where using a steam cleaner is not encouraged. They might not achieve the intended goal and lead to problems such as corrosion. Others can’t withstand the heat. They are listed below.

  1. Nylon mesh screens. They cannot withstand the heat that comes with a steam cleaner.
  2. Antiques, too, have finishes that can be corroded when using a steam cleaner.
  3. Wood is discouraged, especially if it’s not totally dry. If you must clean using a vacuum cleaner, ensure that it’s dry. Test first before you can go on.
  4. Musical instruments.
  5. Freshly painted surfaces.

Steps of cleaning your home

Step 1. The first step is preparation. If you intend to clean the whole floor or the carpet, it’s good to remove all the large toys and other tools that might be around it. For furniture, you can either move them outside or move them to one corner until cleaning on one corner is done. The preparation stage does not end there. You need to remove all the dust particles from all the surfaces. If you remove these particles, it ensures that dust might not get to where you were cleaning as soon as you were done. Therefore it’s an important step that should not be ignored. Further still, the dust on the surfaces is removed by the use of a vacuum cleaner. A vacuum cleaner applies suction pressure on the surfaces to remove the dust particle. It ensures all large particle is removed. Remember, a steam cleaner might not work effectively when there are large dust particles. It’s essential to carry out this process without a hurry to ensure that all particle is removed.

The preparation stage still involves pretreating the surfaces with appropriate pre-treater. All of the pre-treater require to be allowed some time to set in. You don’t have to worry about removing the pre-treater as they can be left, and the steam cleaner will remove it during the cleaning process.

Step 2. Cleaning stage. This is the stage that you prepare the steam cleaner for cleaning and then clean the surfaces. The first step is to fill the tank with water. You need the tank to have water so that it can last longer. Most of the steam cleaners cannot run continuously and therefore require breaks. The majority of them have these breaks when refilling. This is why you have to fill the tank with water. It’s for this reason why you always have to consider the water tank capacity if you want to buy one. A large water tank capacity means it will cover a larger surface before it requires breaks. A smaller one will have breaks at shorter intervals. This will waste a lot of time.

This is an electronic equipment with some weaknesses. To be on the safe side, before using the cleaner, ensure all parts are well connected. This will minimize any sort of accident that might arise in the process.

You can now start cleaning the house. The process of cleaning is generally an easier one. You don’t need to apply any force to get the results. Simply move the cleaner on the surface. You should be in no rush to do this process. Slowly and you will achieve the optimal results.

Step 3. The drying process. Drying of the surface usually takes a shorter time. When you are through leaving the surfaces to dry out, fresh air should be allowed inside to enable faster drying. In some cases, you can accelerate the drying process by using a fan. At this stage, do not make the mistake of exposing the surface to the sun as it will lead to effects such as bleaching.


Conclusion

A steam cleaner is an environmentally friendly cleaner that you can have in your home. It helps you get a fresher breath in your home and will help reduce toxins. It’s a great solution for all your cleaning processes and can be applied to varied surfaces in your home. You can use it for the floor carpets, furniture doors, and windows. Keeping your house fresh should no longer be hard to achieve thing if you know how to use a vacuum cleaner. You can buy one or hire one and use it to clean the home. This article helped you to clean the home on your own like a pro follows the steps, and you will have a clean and fresher home.